In order to make a cereal root generated by ArchiSimple match the biomass of that one generated by FSPM-GroIMP, the biomass limiting factor function in ArchiSimple 9.1 was evaluated. The file that contains the maximum root biomass value allowed for growth in ArchiSimple is called biomrac.txt and it is given in grams at each time step, daily in this case. Figure 1 shows the evolution of a cereal root dry biomass generated by FSPM-GroIMP for a period of 94 days with the Beta factor and without it (no limitation).
The driven data for plant growth, i.e., the potential evapotranspiration (m.s-1) was set constant in 2.0×e-8 m.s-1 in order to speed up the performance of Min3P – ArchiSimple and reduce CPU time but without impacting the final result. Potential evapotranspiration only impacts root water uptake calculated from Min3P, which is not being evaluated in this simulation. This simulation only evaluates the impact of the variable biomrac on dry root biomass generated by ArchiSimple.
The impact of the Beta function on dry root biomass generated by FSPM-GroIMP is in the order of -50% at the end of the simulation on day 94. In reality, Figure 1 shows a delay in root growth, i.e., while the root system starts growing substantially around day 20 without water limitation being considered, the same is only observed 30 days later when water scarcity in the soil is taken into account.
Both values of dry root biomass were from FSPM-GroIMP were used to limit plant growth in ArchiSimple through the biomrac variable, and the results are shown in Figure 2. In these simulation the soil variables in ArchiSimple were set to: Croiss = 6.0; Ramif = 1.0; iCMeca = 0.07; and Orientation = 1.
The Beta function presents little or no impact on root system growth with depth. However, the Beta function impacts root surface density and the ‘spread’ of the root system throughout the horizontal layers of the soil.
Figure 3 shows the integrated root surface density (m-2.m-3) of a cereal root for 94 days without Beta function and with Beta function. It is possible to notice that the impact of the Beta function of root surface density is in the order of -70%.
This sensitivity analysis indicates that for this set of variables used in FSPM-GroIMP without soil water limitation, the root biomass generated is larger than the one generated by ArchiSimple and, therefore, the Croiss variable had to be set much higher than 1.0 in order to generate a larger root system. As well as the root system was set to grow to a larger size, the soil mechanic constraint had to be set to a higher value as well, once the cereal root was growing too deep (deeper than 2 m) and giving unrealistic biomass vertical profiles.